In order for the sterilization procedure to be correct, the following points should be taken into account:
- The chamber should be in a perfect state of cleanliness.
- Burden sharing should permit the free circulation of the sterilizing agent in the chamber.
- Each package should be separated from its neighbors and it should not be in contact with the walls, floor and ceiling of the sterilizer.
- The load of the sterilizer should be constituted preferably by similar materials and should not surpass 80% of the total capacity of the chamber.
Daily care of the sterilizer:
- Remove lint and sediments on the meshes with a brush. It is through the meshes that air and condensation are removed.
- All accessible surfaces of the cart should be washed with a damp cloth using a smooth detergent, moving from the top down. The baskets should be cleaned last.
- All objects that are sterilized by steam should be adequately wrapped or packaged with the corresponding indicator.
Tuesday, July 23, 2024
Refrences
Sterilization manual for health centers
Please Check out file at the following link
Conditions of the process of Dry Heat sterilization
Physical methods: Dry heat -Instructions for use
Methods for controlling the sterilization process
