The fifth stage of high-level disinfection is rinsing of the disinfecting agent, which we review below the important points during the steps:
- Place the tray in the rinsing sink.
- Make an abundant amount of potable quality running water circulate through the channels of the endoscope.
- Proceed with the rinse of the instrument’s exterior.
- Carry out successive rinses of the instrument in order to eliminate all of the toxic remains from the chemical agent used.
- Discard the wastewater after each rinse.
Friday, April 12, 2024
Refrences
Sterilization manual for health centers
Please Check out file at the following link
High-level disinfection stages – Disinfection itself
High-level disinfection stages – Drying
High-level disinfection stages – Rinse
